Alçak Gerilim Motorları

 

 

ABB alçak gerilim AC motorları, arttırılmış enerji verimliliği ve yaşam döngüsü değeri ile geniş bir yelpazede sunmaktadır.
ABB uzun ömürlü ve verimli motorların dünyada ihtiyaç olduğunu savunmaktadır.Uzun yıllar boyunca yüksek verimli ürünler portföyünün temelllerini oluşturmuşlardır.

 Process Performance Motors


ABB Process performance motors are designed to make a difference and operate at the highest levels of efficiency.

They do this for specific reasons: to save energy, reduce operating costs, and enable demanding motor applications to perform reliability and without unscheduled downtime.

 

 

Brake Motors

ABB's brake motors are standard motors modified for braking duties, i.e. three phase induction motors with standard dimensions and output rating. The electromagnetic disc brake is powered, either DC or three phase AC current, from a rectifier located in the motor terminal box.

Wide terminal box - easy installation
Hand release (4 x 90°)
Technical and application support
Service and support
With standard motors' dimensions and output ratings, aluminum frame.

 

 

Marine Motors


ABB's marine motors are certified according to all the major international classification societies. These motors are designed to save energy, which is a very important consideration in marine applications.

Motors approved by:

American Bureau of Shipping (ABS)
Bureau Veritas (BV)
China Classification Societies (CCS)
China Corp. Register of Shipping (CR)
Det Norske Veritas (DNV)
Germanischer Lloyd (GL)
Korea Register of Shipping (KR)
Lloyd's Register of Shipping (LR)
Nippon Kaiji Kyokai (NK)
Polski Rejester Statkow (PRS)
Registro Italiano Navale (RINA)
Russian Maritime Register of Shipping (RS)

Most common applications
fans, pumps, blowers, hydraulics, propellers, thrusters, compressors, deck machines, steering gear, windlasses, oil separators, winches and hoists.

 

 

Permanent Magnet Motor

The permanent magnet motor range extends the effective nominal speed range of the rugged industry workhorses down to 100 – 850 r/min. The motors can simplify drive systems by effectively eliminating the need of speed reduction devices. They are designed exclusively for frequency converter supply, where they provide high speed accuracy even without speed sensors because they are synchronous motors without rotor slip.

Features

Torque range 1000 to 50 000 Nm
Construction based on standard induction motor design
Rotor magnetization by permanent magnets
Totally enclosed IP 55 construction
Air- or liquid cooled

The most common present drive systems, which permanent magnet motor solution could replace:

Traditional AC motor, frequency converter and gear box combination
Traditional slow speed AC motor, typically 10-16-pole or slower with frequency converter
Variable speed DC drive system with gear box


Output power 0 - 220 r/min, 17 - 1120 kW at 220 r/min
0 - 300 r/min, 25 - 1600 kW at 300 r/min
0 - 430 r/min, 38 - 2240 kW at 430 r/min
0 - 600 r/min, 57 - 2500 kW at 600 r/min
Frame size IEC 280 to 560
Frame material Cast iron/Welded steel
Voltages All voltages

Protection IP 55
Cooling Air or liquid

 

Single Phase Motors

High output - more power from the frame, saving space, reduced weight and lowering purchase cost
Wide voltage range
Low noise levels
Availability - world-wide sales network, large base of stocked motors, extensive modification possibilities
Technical and application support
Service and support
Low voltage AC induction single phase motors with aluminum frame, standard motors' dimension

Output power 0.065 to 2.2 kW
Frame size IEC 56 to 100
Number of poles 2 to 8
Voltages all commonly used voltages
Frequency 50 or 60 Hz
Protection IP 55

 

 

 

Water Cooled Motors

Water cooling is a highly efficient method of transferring heat away from the motor. Cooling efficiency is maintained even at lower speeds, ideal for constant torque applications.

Typical water cooled motor applications include thruster and propolsion motors, wind turbine generators, water and waste water pumps, tunnel-boring machines, extruders, printing presses and paper machines.

Output power 90 to 1200 kW
Frame size IEC 280 to 450
Number of poles 2 to 8
Voltages all commonly used voltages
Frequency 50 or 60 Hz
Protection IP 55, IP 56
Cooling IC71W
A high efficiency motor; fulfills IE2 requirements.
 

 

 

General Performance Motors

ABB’s General performance motors are best suited for applications where simplicity and off-the-shelf availability are paramount. With ABB quality and support these motors have the features appreciated by volume customers and serial OEM’s.

 

 

 

Site İçi Arama
Yeni Ürünler

DC MOTORLAR

Yüksek verimli, çeşitli güç seçenekleri ile kaliteli ve enerji tasarruflu dc motor serisi...